Titration Parameter Ph Stat Titration - Xylem TitroLine 7800 Mode D'emploi

224
Dead-Stop Titration and Polarization voltage
Polarisation voltage in mV can only be set for Dead-Stop titration (Fig. 166).
Fig. 166
The values can be set between 40 and 220 m. The pre-setting is 100 mV.
Low polarisation voltage
High polarisation voltage
Titration parameter pH-Stat Titration
4.6.7
Explanatory Notes for the pH-Stat titration, see also  4.6.2.4.
The titration parameters for the first Level (titration level) are already described in detail in the endpoint titration.
The other settings for the pH-Stat titration are carried out in the sub-menu «End of titration/Measuring
settings» (Fig. 167 and Fig. 168).
Fig. 167
Fig. 168
insensitive
sensitive