Xylem TitroLine 7800 Mode D'emploi page 205

Fig. 118
You have the following options:

«Manual sample weight»: The sample weight is enquired by a prompt at the start of the method and
manually input.

«Automatic sample weight»: The sample weight is automatically transferred by a connected balance.

«Fixed sample weight»: A fixed sample weight is input in g. This weight will then automatically be used
for each start of the method.

«Manual sample volume»: The sample volume in ml is prompted at the start of the method and
manually input.

«Fixed sample volume»: A fixed sample volume is input in ml. This volume will then automatically be
used for each test of the method.
4.6.3.3 Formula unit
The formula unit can be selected in the «Unit» submenu (Fig. 119).
Fig. 119
Once the selection made (e.g. «%»), the unit will also be displayed as piece of information (Fig. 120).
Fig. 120
By pressing the «INS» (Insert) key on the external keyboard, you can also add new units.
205