Titrationstand Tm 235 Kf - Xylem TitroLine 7800 Mode D'emploi

Titrationstand TM 235 KF

1.3.2
Translation of the legally binding German version
In connection with the titrator TitroLine
EMC compatibility according to the Council Directive: 2014/30/EU;
applied harmonized standards: EN 61326 Part 1: 2013
Low-voltage directive according to the Council Directive 2014/35/EU;
Testing basis EN 61 010-1: 2010 for laboratory equipment
RoHS Council Directive 2011/65/EU
FCC Part 15B and ICES 003
Country of origin: Made in Germany
Pump: Free volume flow- air:
Delivery pressure max.:
Flow rate liquid medium:
Stirring speed: 50 ... 1000 U/min
Hoses: PVC- hose (outer diameter 6 x 1 mm)
PTFE- hose (outer diameter 4 x 0.5 mm)
Connections
Low voltage input 12 V /  on the backside of titration stand
Power supply:
Plug connection: plug for low voltage connection – phone jack-,
Positive pole at pin contact, inside contact  = 2.1 mm, USA/Japan,
Power supply via titrator TitroLine
Housing:
Material: Polypropylene, polyester coated
Dimensions: 80 x 130 x 250 mm (W x H x D), height without stand
Weight: 1.0 kg
Ambient conditions:
Ambient temperature: + 10 ... + 40 °C for operation and storage
Humidity according to EN 61 010, Part 1:
Max. relative humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C
®
7800
Do not used in hazardous locations!
flow rate 2.25 l / min
1,5 bar
approx. 0,8 l / min
®
7800
153
(Release: 16. August 2018)