EQUATION Kaltar 500 Manuel D'utilisation page 127

Problem
The device does not follow
the commands of the pilot
wire.
If the problem persists, contact the after-sales service of your store.
Warranty
The warranty does not cover problems related to improper installation, incorrect wiring or improper use.
In this case, damages and interests are not supported.
CHARACTERISTICS
Model Identifi er
Feature
Heat output
Nominal heat output
Minimum heat output
Maximum continuous heat output
Auxiliary Electricity Consumption
At nominal heat output
At minimum heat output
In standby mode
Type of heat input / temperature of the room
Feature
Electronic room temperature control plus weekly timer.
Other control options
Room temperature control, with presence detection.
Room temperature control, with open window detection.
with distance control option.
with adaptive start control
with working time limitation
with black bulb sensor
Contact Details
Causes, Solutions
Be sure of the proper use of the Centralized Manager (see instructions of the central
manager).
Check that the device is in manual mode.
Check that the pilot wire is connected.
Check the proper transmission of programming commands. As part of the program-
ming via pilot wire or powerline, the frost-free or load shedding commands are
priority.
The changeover time from the Comfort mode to Eco mode is about 12 seconds. The
changeover time from comfort -1 / -2 to comfort is about 5 minutes.
SFLC IC0
Symbol Value
P nom 500
P min 500
P max,c 500
el max 0
el min 0
el sb 0,292
Unit Additional information
yes
no
no
yes
yes
no
no
ADEO Services - 135 Rue Sadi Carnot
59790 - RONCHIN - FRANCE
Unit
750 W
750 W
750 W
0 W
0 W
0,292 W
FR
ES
PT
IT
EL
PL
UA
RO
EN
127