EQUATION Kaltar 500 Manuel D'utilisation page 121

• No temperature adjustment is possible in Programming mode, pressing the
type of range currently set by the program (Comfort, Eco, or Off ):
The heater is on a Comfort range,
the desired temperature is that set
in manual mode.
To use the programming mode, it is essential to have set the day and time
When the device is installed, or after a power cut, the fi rst access to programming mode sends directly to the
parameter setting module to set the time and day (paragraph 3 below)
Setting of the heater
In the Parameter setting mode, it is possible to set:
• the time and day of the week
• the program (P1 to P7) assigned to each day of the week (d1 to d7)
• for each program (P1 to P7), the type of range (Co, Ec, oF) for each hour of the day
Setting the time and day of the week
1 - Press several times to choose the setting mode
2 - Press to display
3 - Press to display the time. The
4 - Set the hour using the
5 - Press to display the minutes. The
6 - Set the minutes with the
7 - Press to display the day of the week. The
8 - Set the day of the week with the
d1 d2 d3
Monday Tuesday Wednesday Thursday
9 - Press to validate
Example: to set 4:30 p.m. on a Wednesday
→ → →
Assigning a program to each day of the week
1 - Press several times to choose the setting mode
2 - Press twice to display
3 - Press to display the fi rst day. The day number is displayed
The heater is in an Eco range, the
desired temperature is 3.5 ° C lower
than that set in manual mode.
symbol fl ashes alternately with the hour.
and keys
and keys
and keys
d4 d5 d6 d7
Friday Saturday Sunday
→ → →
x4
→ → → →
, the
symbol fl ashes alternately with the minutes.
symbol fl ashes alternately with the day.
A long press on the
through the numbers quickly.
A long press on
→ → →
, the
or button displays the
The heater does not heat up, only
BOOST mode can heat it up.
symbol is displayed.
or keys scrolls
exits the menu
→ →
x30
symbol is displayed.
FR
ES
PT
IT
EL
PL
UA
RO
EN
121