Controls And Functions; Setting The Time And Day Of The Week; On/Off Switch; Operating Modes - EQUATION Kaltar 500 Manuel D'utilisation

USE

Controls and functions

Manual mode
Activation or
Deactivation of
BOOST mode
(max power)
BOOST Mode
Activation LED
• Setpoint
temperature
• Duration of the
Boost.
Heating LED
(lights up when
the resistance is
supplied)

Setting the time and day of the week

When starting up the device, it is important to set the time and the day of the week.
→
Displays
Comfort
Temperature
Eco Temperature
(Comfort - 3.5°C)
On / Off switch
An on / off switch is located under the control box of the device. (1 = On)
Use this only for a long shutdown (several days).
It may be necessary to re-set the date and time after long shutdown.

Operating modes

Several operating modes are available :
• Manual mode : The device continuously monitors the setpoint temperature (desired temperature).
• Programming mode : The device follows the pre-recorded internal programs for each day of the week.
These programs defi ne at what times of the day the radiator must follow the Comfort temperature
(setpoint temperature), the Eco temperature (setpoint temperature - 3.5 ° C cannot be changed), or be
switched off . It is possible to customize these programs.
To use the programming mode, it is essential to have set the day and time
• Boost mode : the device operates at maximum power for a period between 15 and 60 minutes.
Program mode
→ →
No heating
Setting the time
and day
Settings
→ →
Menu start
Menu exit
• Change Mode
• Adjust parameters
• Validate
• Return (long press)
Increase
Lock
(press the 2 keys)
Decrease
On / Off switch
Assigning programs
to days
Customizing programs
FR
ES
PT
IT
EL
PL
UA
RO
EN
119