EQUATION Kaltar 500 Manuel D'utilisation page 122

4 - Choose the day to be set using the
5 - Press
FR
6 - Set the program with the
7 - Press
ES
8 - Go back to point 4 for each of the other days
Example: I do not work on Wednesdays, I want to assign program P6 to this day (d3).
PT
→
After 1 minute without any action, the module automatically exits the setting mode.
IT
Changing the time ranges of a program
1 - Press
EL
2 - Press
3 - Press
PL
4 - Choose the program to modify with the
5 - Press
UA
6 - Choose the hour to modify with the
RO
7 - Press
8 - Press
9 - Go back to point 6 for each of the other time slots
EN
10 - After the last hour (23)
11 - Press
12 - Go back to point 4 for each of the programs to modify
Example : I would like to modify the P6 program so that it is off between 0 a.m. and 4 a.m., and that it off ers
a Comfort temperature between 9 a.m. and 1 p.m. and between 7 p.m. and 9 p.m. It is therefore
necessary to pass the ranges between 0h and 4h from Eco to Off , switch the range between
8 a.m. and 9 a.m. from Comfort to Eco, switch the range between noon and 1 p.m. from Eco to
Comfort, and switch the range between 6 p.m and 7 p.m from Comfort to Eco.
Co
P6
Ec
Co
P6
Ec
Of
→
→
→
x6
122
the day number
and
to validate. The next day is displayed.
→ → → →
several times to choose the setting mode
3 times to display
to display the fi rst program. The program number is displayed
the fi rst hour fl ashes alternately with the type of range
several times to choose the type of range (Comfort, Eco, Off )
the next hour is displayed.
is displayed
then to go back to the list of programs
0h
4h
0h
Oh 6h
→ → → →
x3
→ →
x2
→ →
x4
→ →
x2
and keys
fl ashes alternately with the program
keys
→ → → →
x2
and keys
and keys
8h
9h
12h
→ → → →
x5
→ → →
x2
→ →
x2
→ → →
x6
.
→ →
x5
the symbol is displayed.
18h
19h
13h
18h
→ →
x2
→ →
→ → →
x4
→
→ →
21h
21h
24h
→
→ →
x2
→