OHAUS a-AB33M1 Mode D'emploi page 33

Analyzer and Bench Meter
7 EVEN
7 ODD
7 NONE
8 NONE
Stop bit
Set the number of stop bits.
1 bit
2 bit
Handshake
Set the flow control method.
None
Xon/Xoff
Date/Time
Time format
Set the time format.
12H Clock
24H Clock
Date Format
Set the date format.
MM/DD/YY
DD/MM/YY
YY/MM/DD
Adjustment
Enter this menu to adjust data and time.
1. Touch the Menu icon
2. Touch i-Steward, and then touch Adjustment.
3. The first two digits of date on the upper left corner of the screen starts to blink.
4. Press the
you finish to adjust the next digits of date and time.
5. Then touch Next again until all the digits have been adjusted, and the
meter/analyzer returns to the main menu.
Brightness
Enter this menu to Increase or decrease the display brightness under different lighting
conditions.
High
Medium
Low
Keypad Beep
Enter this menu to enable or disable the beep sound when pressing buttons.
ON
OFF
= 7 data bits, even parity
= 7 data bits, odd parity
= 7 data bits, no parity
= 8 data bits, no parity
= 1 stop bits
= 2 stop bits
= no handshaking
= XON/XOFF software handshaking
= 12 hours
= 24 hours
= Month/Date/Year
= Date/Month/Year
= Year/Month/Date
to enter menu option.
or button to adjust the date. Touch Next on the screen when
= high brightness
= medium brightness
= low brightness
= enabled beep sound
= disabled beep sound
EN-31