OHAUS a-AB33M1 Mode D'emploi page 27

Analyzer and Bench Meter
JJG
DIN
EU
Merck
Note: please refer to Select a predefined buffer group section for details.
Conductivity (a-AB33M1, a-AB33EC)
Cell K
0.01~10.0
The default value is 0.1 for a-AB33EC model and 1.75 for a-AB33M1 model.
The cell K value of the compatible conductivity electrode AquaSeareacher series is as
follows:
Series
STCON7
STCON3
Note: please refer to Set cell K value section for details of the cell K value setting.
Standard solution (Std.Solution)
10uS/cm
84uS/cm (a-AB33EC)
146.5 μS/cm,
500uS/cm
1413uS/cm (a-AB33M1)
12.88mS/cm
Note: please refer to Set calibration standard solution section for details of the
standard solution setting.
Reference temperature (Ref.Temp.)
20°C (68°F)
25° C (77° F)
Note: please refer to Set reference temperature section for details of the reference
temperature setting.
Temperature coefficient (Temp.Coeff.)
0.0~10.0%/℃ (the default is 2.0%/℃)
Note: please refer to Set Temperature coefficient section for details of the
temperature coefficient setting.
TDS Factor: 0.01~5.0 (the default is 0.50)
Note: please refer to Set TDS factor section for details of the TDS factor setting.
Temperature
Temperature unit
° C
° F
Cell K value
0.08-0.1
1.5-2.0
EN-25