Error Codes; Removal - EUROM Coolsilent 100 Wifi Manuel D'instructions

 Is the water tank full? Empty it.
 The room temperature is lower than the set temperature; amend the set
temperature.
 The unit doesn't seem to be very effective
 Measure the outlet temperature; this must be approx. 10° cooler than room
temperature.
 Is there direct sunlight? Shut the curtains.
 Are windows or doors open? Shut them.
 Are there too many people in the room? They produce heat!
 Is the space too big?
 Is there an object in the room that is generating (a great deal of) heat? Switch it
off or remove it.
 Are the filters dusty or covered in dirt? Clean them.
 Is the air inlet or outlet (hose) blocked? Make sure there is free air flow.
 The unit is making a noise
 Is the surface underneath the machine sturdy and even?
 The flow of coolant in the unit also produces a little noise. This is perfectly normal.
 The unit switches itself off
 The overheating safeguard may have switched the unit off. See 'Safety'.

Error codes

Error code Cause
E0 Error temperature sensor
E2 Wasser tank is full
Warning: Never attempt to repair the device yourself!

Removal

In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should be
made suitable for reuse in order to prevent any adverse effects to
health and the environment caused by unregulated waste collection.
Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as
possible can be recycled.
What to do
Have it replaced. The unit works without
temperature setting.
Switch the unit off and empty it
manually. Switch it on again.
45