Electrical Safety - Pro-Point 9083577 Mode D'emploi

9083577
14. Keep hands away from the drum when it is rotating and the
distributor tube.
15. Never force the tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under
no load, but roughly under load.
16. Keep hands and fingers away from the work area. Any part of the
body contacting the tool's working parts could result in an injury.
17. Check for damage to the cable before each operation.
18. Retract the cable fully after each use.
19. If operation includes potentially hazardous chemicals, contact the
manufacturer of said chemical to ensure proper safety precautions
are taken.
20. Only transport this tool if the handle is locked into the upright
position.
21. Never point the tool towards yourself.
22. Never touch the tool accessory or workpiece during or immediately
after use. They may be hot and could inflict a burn injury.
23. Take work breaks to prevent the tool's motor from overheating
and/or overloading.
24. Never use a tool with a cracked or worn tool accessory. Change
the tool accessory before using.

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part of your
body that is wet or damp. Wet skin reduces resistance to electrical
current, increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug
is connected to a properly grounded receptacle.
WARNING! All wiring should be performed by a qualified electrician.
1. Disconnect the tool from the power supply before making any
adjustments, changing accessories, cleaning, servicing or when
storing. Such preventive safety measures reduce the risk of starting
the tool accidentally.
6
Power-Feed Electric Drain Cleaner
For technical questions call 1-800-665-8685
V1.0