PRO-POINT 9083577 Mode D'emploi page 5

V1.0
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules. If
you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3. Ensure the power supply matches the tool's motor voltage (see
Specifications).
4. Always ensure the tool is turned off and disconnected from its
power source when not in use or when transporting.
5. Remove adjusting keys and wrenches before using the tool. The
tool may eject an attached wrench or a key and cause an injury to
you or a bystander.
6. Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must
repair and verify the power tool is operating correctly, before it can
be used.
7. Never leave this tool unattended while it is running.
8. Do not allow the cutter to stop turning while the machine is
running. This may overstress the cable and cause damage.
9. During operation, ensure one gloved hand is controlling the cable
at all times to avoid damage.
10. Check the tightness and security of all bolts, nuts, screws and
components before each operation.
11. Do not operate if the belt guard has been removed.
12. During operation, one individual must be in charge of controlling
both the cable and the foot switch to prevent damage to the cable.
13. Reverse the motor only when pulling the cable out of a drain, pipe
or obstruction. Make sure the drum has stopped turning before
engaging.
Visit www.princessauto.com for more information
Power-Feed Electric Drain Cleaner 9083577
5