Personal Protective Equipment; Personal Precautions - Pro-Point 9083577 Mode D'emploi

9083577

PERSONAL PROTECTIVE EQUIPMENT

1. Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2. Wear the appropriate type of full-face shield in addition to safety
googles
3. Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
3.2 Latex or rubber gloves are recommended to be worn under
work gloves to provide added protection.
4. Wear protective clothing designed for the work environment and tool.
5. Non-skid footwear is recommended to maintain footing and
balance in the work environment.
6. Wear the appropriate rated dust mask or respirator.
7. This tool can cause hearing damage. Wear hearing protection gear
with an appropriate Noise Reduction Rating to withstand the
decibel levels.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected situations.
4. Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
5. Individuals with pacemakers should consult their physician before
using this tool.
6. Wash hands after every operation.
4
Power-Feed Electric Drain Cleaner
For technical questions call 1-800-665-8685
V1.0