VOLTCRAFT Quadro B6 Notice D'emploi page 81

Display of the rechargeable battery and charger temperatures
Ext.Temp
Int.Temp
This function shows the external rechargeable battery temperature and the internal temperature of the charger.
The external temperature can only be displayed if an external temperature sensor is connected to the corre-
sponding channel (not enclosed, but available as an accessory).
Loading factory settings (reset)
LOAD FACTORY SET
This recovers the factory settings (reset).
Keep the button „START/ENTER" pressed for 3 seconds. The lower display line shows „COMPLETED"; the charger
restarts and then is in the main menu again.
Observe that all values set by you are then reset to factory settings; the 10 rechargeable battery memories
(see chapter 14) are also deleted.
Display firmware version
VERSION
The current firmware of the charger is displayed at the lower right of the display.
0C
37C
ENTER
1.10
81