Cook & Hold
When using the Cook & HoM option, the oven begins to heat
immediateiy after the controi has been set. Then, the oven
cooks for a specified bngth of time. When that time has
dapsed, the oven will keep the food warm for up to an hour
then automatically turn off.
TO set Cook
& HoJd:
1. Press the Cook & Hold pad.
° HOLD will flash to indicate that you are in
Cook & Hold programming.
° 00:00 will flash in the display.
2. Sdect the amount of time you want to cook by using the
number pads.
° HOLD continues to flash.
° The time will light in the display.
° Time can be set from ten minutes (00:10) to 11 hours,
59 minutes
(11:59).
3. While HOLD is still flashing,
press Rake,
Conveet
Bake or Convect
Roast
(select
modeb}
and select the oven temperature,
Press the Aatoset
0 pad for 350 ° F or the
appropriate
number pads.
° The desired function
word wii] flash.
Bake .....
0
Autoset
, The oven temperature
can be set front
170 ° F to 550 ° F.
4. Press the desired function pad again OR
wait four seconds.
° The desired function word wiii remain ill
° The cooking time wiii show in the display.
° The actual oven temperature wiii be displayed
during preheat.
° The set temperature wiii display when the oven is
preheated.
When the cooking
time has elapsed:
° Four beeps will sound.
° HOLD and WARM will @ht.
° 170°and the time of daywiH display.
After one hour in HOLD WARM:
° The oven turns off automatically.
° HOLD and WARM go off.
° Remove food from oven.
To cancem Cook & Hold at any time:
Press the CANCEL pad. Remove food from oven.
Delay Cook & Hold
Do not use delayed baking for highly perishable foods such
as dairy pr0ducts, p0rk, p0ultry, 0r seafo0d .
When using Delay, the oven begins to cook later in the day.
Set the amount of time that you want to delay before the oven
turns on and how long you want to cook. The oven begins to
heat at the selected time and cooks for the specified
length of
time.
Delay time can be set front 10 minutes @0:10} to 11 hours, 59
minutes (11:59}.
To set a Delayed
Cook & Hold cycJe:
1. Press the Delay 1 pad.
1
|
, DELAY flashes in the display.
Delay
° 00:00 flashes in the display.
2. Using the appropriate number pads, enter the amount of
time you want to delay the start of the Cook & Hold cycle.
3. Press the Cook & Hold pad.
° HOLD and DELAY flash in the display.
° 00:00 flashes in the display.
4. Enter the amount of dine you want to cook using the
number pads.
5. Press Bake, Convect Bake or Convect
Roast pad (select models}.
..............................
6. Set the oven temperat#re desired by pressing the
Aatoset 0 pad or the appropriate number pads.
U
, 350° will light when Aatoset 0 pad is pressed.
;\u[osct
° After four seconds, the entered delay time
will appear in the display.
° HOLD turns off.
° BAKE and DELAY remain lit to remind you that
a delayed Cook & Hold cycle has been programmed.
Notes:
° Do not use Delayed Cook & Hold for items that require a
preheated oven, such as cakes, cookies, and breads.
° Do not use Delayed Cook & Hold if oven is already hot.
11