Connection Scheme Vacuum And Cooling Water; Electric Wiring Between Automatic Module And Vacuum Pump - Heidolph LABOROTA 20 S A Mode D'emploi

Connection scheme vacuum and cooling water

11.1.

12. Electric wiring between automatic module and vacuum pump

1. Connect automatic module with terminal box (with cover) located on the rear panel of the basic
item, close to the power cord fairlead.
2. Connect vacuum pump with outlet in the rear panel of the automatic module. Turn vacuum
pump's power switch to "ON".
3. Automatic function requires both components connected with their outlets, and vacuum
pump's power switch in "ON" position.
vacuum
cooling water
83
E