Switching The Speaker Impedance - Pioneer VSX-D414 Mode D'emploi

Setting up the receiver
Switching the speaker
impedance
We recommend using speakers of 8Ω with this
system, but it is possible to switch the imped-
ance setting if you plan to use speakers with a
6Ω impedance rating.
DVD/LD DVD 5.1 TV/SAT DVR/VCR
CD-R/
TAPE/MD FM AM
CD
STANDBY / ON
PHONES
MIDNIGHT/ SPEAKER VSB
LOUDNESS IMPEDANCE MODE TONE QUICK SETUP
MULTI JOG
• With the receiver in standby, press
STANDBY/ON while holding down the
SPEAKER IMPEDANCE button.
Each time you do this, you switch between the
impedance settings:
• SP 6 OHM – Use this setting if your
speakers are rated at 6Ω.
• SP 8 OHM – Use this setting if your
speakers are rated at 8Ω or more.
STATION TUNING
TUNER EDIT CLASS MPX INPUT ATT FL
MULTI JOG
VSX-D514
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MULTI JOG
ENTER
MASTER VOLUME
DOWN UP
06
37
En