Ingeteam INGECON SUN 3Play Série Manuel D'installation page 106

Ingeteam
1. Drill holes in the wall with a suitable bit for the fastening elements to be used to secure the plate to the
wall later. Keep in mind the plate´s measurements. The diameter of the holes of the plate are 8 mm.
2. Fix the plate using fastening elements that are appropriate for the wall onto which it is to be installed.
3. Suspend the unit from the plate by fitting the slats in the openings on the back of the unit.
106
a = 220 mm.
a = 220 mm.
ABO2011IQM01_A - Installation and Operation Manual
Installing the unit