Panasonic CS-TE12HKE Mode D'emploi page 4

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Front panel
(movable panel)
Air fi lters
Horizontal airfl ow
direction louver
• Manually
adjustable.
Remote
control
display
4
Super alleru-buster fi lter
Ionizer
Do not touch
during operation.
Receiver
Vertical airfl ow
direction louver
• Do not adjust by
hand.
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control display
to prevent the unit from starting / stopping improperly.
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature could induce
energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO SELECT OPERATION MODE
MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During operation
mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• For cold air prevention, air might not blow out immediately and power
indicator blinks when operation starts.
• Also operates in defrost mode (maximum 12 minutes) where by the
power indicator blinks. The melted frost is drained at outdoor unit and
indoor fan is stopped.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
MOVABLE PANEL
• Opens for air intake when operation starts, and closes when operation
stops. During this time, do not hold it as it may cause malfunction or
breakdown.
Auto OFF/ON button
• Used when remote control is misplaced
or malfunction.
Action
Press once.
Press and hold until 1 beep is
heard, then release.
Press and hold until 1 beep is
heard, then release.
Press again until 2 beeps, then
release.
Press the button to turn off.
INDICATOR
(Green)
(Orange)
(Blue)
Mode
Auto
Cooling
Heating