Use - Webasto Thermo Call TC3 Guide D'installation Et Mode D'emploi

Thermo Call TC3

Use

Your Webasto parking heater can be remote controlled by a phone. All mobile or fixed network phones with tone dialing are suitable for
use as control units. This enables you to operate a parking heater installed in your vehicle in the easiest possible way. Not only the selection
of the switch-on duration, but also pre-programming of a starting time within the next 24 hours is possible. Mobile applications, "Apps"
are offered for Apple, Windows Phone 8 and Android smart phones. These can be found on the respective markets. The available
descriptions are also available there.
Notes:
•
Before commissioning the Thermo Call TC3, please observe the general operating instructions of your Webasto parking heater and
the location of your vehicle regarding the establishment of a connection.
•
Both with the Thermo Top E/C and with the Thermo Top Evo heaters, we recommend setting the heating time in accordance with
the subsequent driving time to prevent discharging the battery (if vehicle blower is used for pre-heating the cab). With a driving
time of approx. 30 minutes (one way), we recommend setting a heating time of 30 minutes.
The GSM module is set to a heating time of 60 minutes from the factory. The heating time can be set to between 1 and 999
minutes. Continuous heating is also possible. Details are provided on the following pages.
•
It is recommended to change the Thermo Call TC3's access code from the standard format of 1234 to a personalized one. You will
find details in the list of possible text message commands.
Webasto Thermo & Comfort N.A., Inc.
15