Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Thermo Call TC3
Final Connecting and Commissioning
-
Connect the 12-pin connector of the GSM module wiring harness to the module.
-
After connecting voltage, the button will flash 2x intermittently.
-
After approx. 1 minute, the button will flash 1x intermittently and, depending on the dial-in time of the SIM card, can take a total of up
to 5 minutes until it is finally ready for operation.
-
As soon as operational readiness is achieved, program the phone numbers that the Thermo Call TC3 will receive instructions from. See
Note below.
-
To query the firmware version send the text message command "VERSION" to the Thermo Call TC3.
Note:
To begin using Thermo Call TC3 functionality, permission must be granted to each specific phone number that will provide commands.
Refer to page 21 section 1234ACCLIM:XXXXXXX.
Technical Data
Power Supply
Bias current consumption
Current consumption during data transfer
Max. output current
Max. input voltage
Switching voltage for inputs
Permissible ambient temperature
Permissible storage temperature
Dimensions (L x W x H)
Weight
Protection type
Material
Webasto Thermo & Comfort N.A., Inc.
8 to 35 V DC
0.005 A
0.040 A
1.000 A
35 V
+5.5 V
-40°C to +85°C
-40°C to +85°C
95 x 55 (75) x 30 mm
100 g
IP50
PBT
13
Publicité
Chapitres
Table des Matières
