Safety In Operation; Preparation Before Use - Hkoenig Rp4 Manuel D'instructions

2.

SAFETY IN OPERATION

DO NOT OPERATE this BBQ set near water
a)
sources or flammable liquids.
DO NOT OPERATE this BBQ set on or near any hot
b)
surface. (Hot plate, electric stoves etc).
c) Ensure the BBQ set is placed on a stable, secure
surface to eliminate the possibility of tipping over or avoid
any water in the set.
d) Closed supervision is necessary when this BBQ set
is used by children. Never operate this appliance
unattended.
e) Always operate this BBQ set from an earthed
domestic 230V/50Hz power socket.
f) Never try to touch the hot surface of this BBQ set
before it is cool down.

PREPARATION BEFORE USE

1. Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth.
Place your appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage.
Ensure the controller is in the "O" position before plug in.
OPERATION
1. Connect the BBQ to the power supply. Turn the switch from "O" TO "一 " position and the
indicator light is on for working, then pre-heating the BBQ set for 5 minutes.
2. As the different heat of cooking request, put your food on the small pans and place them
under the heating sources. Or place your food directly on the grill plate for the purpose of
grilling.
3. When you have finished using the BBQ, turn the switch to "O" position and unplug it from
the socket. Wait until the appliance is completely cool down before moving or cleaning.