Freezing The Picture; Adjusting The Volume; Customizing The Sound - Insignia NS-LCD26A Guide De L'utilisateur

Insignia NS-LCD26A LCD TV
4 Within the menu, use
menu option. Press OK or
setting, enter a sub-menu, or toggle the
settings of the selected menu item.
Options include:
Options Description
Noise Reduction— Select [ON] to reduce noise in
Spatial the picture (commonly called
snow).
Noise Reduction—
Select [OFF] to turn off this
Speckle
function.
Noise Reduction—
Temporal
3D Y/C Select [ON] to provide high
quality images with minimal dot
crawl and cross color noise.
Select [OFF] to turn off this
function.
Setting Select and activate this function
to reset Advanced Video Menu
settings and adjustments to the
defaults.

Freezing the picture

To freeze the picture:
• Press the FREEZE button to freeze the
image on the screen (with the video sources
still running) Press the button again to
reactivate the image.
Caution
If a fixed image is displayed on the screen for a
long time, that fixed image may become imprinted
on the screen and remain visible.

Adjusting the volume

To adjust the volume:
• Press the VOL+ button to increase the
volume or press the VOL- button to decrease
the volume.
• Press the MUTE button to turn off all sound.
Press the MUTE button again to restore the
sound.

Customizing the sound

To customize the sound:
1 Press MENU.
2 Press or
then press OK or
3 Within the menu, use
navigate through the options or adjust an
option. Press OK or
enter a sub-menu, or toggle the settings of
the selected menu item.
or to select a
to confirm a
to select the Audio menu,
to access the menu.
, , , or to
to confirm a setting,
www.insignia-products.com
Options include:
Options Description
Bass Adjust the bass (low sounds)
Treble Adjust the treble (high sounds)
Balance Adjust the volume balance (left
and right volumes)
Audio Mode Select an audio mode. You can
select from the following:
Note: To quickly change the
audio mode, press the AUDIO
button repeatedly.
Audio Language Select an alternate language if
the program has more than one
language. This option works only
for digital programs.
Note: To quickly select an audio
language, press the MTS/SAP
button repeatedly.
MTS (multi- Select a stereo mode as a default
channel TV sound) mode when you switch your
television to an analog program.
You can select from the
following:
This option works only for
analog programs.
Note: To quickly select a stereo
mode, press the MTS/SAP
button repeatedly.
Digital Audio Select the audio output mode
Output received from S/PDIF. You can
select from the following:
4 Press EXIT to return to watching the
television.
Setting up the clock automatically
If you set up the clock automatically, the time is
set from a digital channel signal. The digital
signal includes information for the current time
provided by the broadcasting station. If the
automatic time is set incorrectly, set up the clock
manually.
• News—Select for a
program that has speech
or conversation.
• Music—Select for a
music program.
• Movie—Select for a
movie program.
• User—Specify your own
custom mode.
• Mono—Select for
monophonic reception.
Use this option to reduce
noise during weak stereo
broadcasts.
• Stereo—Select for stereo
reception when viewing a
program broadcast in
stereo.
• SAP—Select to
automatically switch the
television to second audio
programs when this
signal is received.
• RAW—Output audio
signal as its original
format.
• PCM—Output audio
signal by PCM form.
15