Specifications; Using The Universal Infrared Remote Control - Insignia NS-27HTV Guide De L'utilisateur

NS-27HTV 27-inch Color TV

Specifications

Design and specifications are subject to change
without notice.
Model NS-27HTV
TV system Digital Tuner for ATSC terrestrial
broadcasts and nonscrambled
(ClearQAM) cable programs.
NTSC analog tuner for VHF/UHF
or CATV.
HDMI Support 480P60, 720P60, and 1080I60
Power supply ~120V 60 Hz
Power consumption 200 W
Chassis construction IC solid state
Picture tube 27"
Audio output 5Wx2
Loudspeaker 8 ohm
Tuner type 8-VSB, 64/256QAM, NTSC
Remote control Infrared, AAA (1.5Vx2) batteries
Channel coverage Air: VHF 2-13 UHF 14-69
CATV: 1-135
Antenna input Impedance 75 ohm (AIR) coaxial
input
Dimensions 30.12" x 21.46" x 21.54"
(765 x 545 x 547 mm)
Weight 101.2 lbs (45.9 kg)
Accessories User's guide
Remote control
Warranty card
Using the universal infrared
remote control
C
ONTROLLING DIFFERENT DEVICES
The remote control can control the television,
DVD, and VCR. No matter which device it is
controlling at the time, if you press TV, DVD, or
VCR for less than two seconds, you can set the
current device to television, DVD, or VCR.
S
ETTING UP THE REMOTE CONTROL FOR YOUR DEVICE
To set up the remote control:
1 Look at the code list starting on page 12 and
find the brand name you want to set up and
its three-digit code number.
2 Press the TV button for more than two
seconds until the LED goes out.
3 Release the button and the LED lights up
again.
4 Enter the three-digit code. The remote stores
the number and sets up the current device
type to the code number corresponding that
type. The remote exits the program mode
after the LED slowly flashes three times.
If the code number exceeds the actual code
number or you pressed the wrong button
(except for MENU and POWER), the LED
flashes quickly eight times and returns to the
type and code value it had previously.
Code number ranges of different devices:
Type Minimum
TV
VCR
CD
DVD
CAB
SAT
C
HECKING THE CURRENT REMOTE CONTROL CODE
NUMBER
The remote control can inform you of its current
setup code number.
To find the current remote control code number:
1 Press TV for more than two seconds until the
LED goes out.
2 Release the button and the LED lights up
again.
3 Press MENU, then read the LED.
www.insignia-products.com
Maximum
000 199
200 399
400 499
500 599
600 699
700 799
Default
149
274
428
527
629
728
11