Insignia NS-LCD26A Guide De L'utilisateur page 14

To select the tuning band:
1 Press MENU.
2 Press or
press OK or
3 Press or
press OK or
Options include:
• Air
• Cable
• Cable HRC
• Cable IRC
• Cable Auto
Note
If using cable, select the type of cable system your
television is connected to. If you are not sure,
select Cable Auto.
4 Press EXIT to return to watching the
television.
Searching for channels
You should complete an auto channel search to
search for all channels available to your
television. The television then stores them in
memory on the channel list.
To search for channels:
1 Press MENU.
2 Press or
press OK or
12
to select Setup menu, then
to access the submenu.
to select Tuning Band, then
to select the tuning band.
to select Setup menu, then
to access the submenu.
www.insignia-products.com
3 Press or
then press OK or
channel search. The television automatically
searches for all available TV/DTV (if using an
antenna) or CATV/CADTV (if using cable)
program.
Note
If you want to stop the search, press the EXIT
button.
Automatically adding channels
After the initial auto channel search, you can use
the Add On Channel Search option to search for
new stations, and add them to the channel list.
To automatically add channels:
1 Press MENU.
2 Press or
press OK or
3 Press or
then press OK or
channel search. The television automatically
searches for new stations and adds them to
the channel list.
Note
If you want to stop the search, press the EXIT
button.
Manually adding or deleting channels
After saving channels into memory, you can
manually add or delete channels from the
channel list.
To manually add or delete channels:
1 Press MENU.
2 Press or
press OK or
Insignia NS-LCD26A LCD TV
to select Auto Ch Search,
to begin the auto
to select Setup menu, then
to access the submenu.
to select Add On Ch Search,
to begin the add on
to select Setup menu, then
to access the submenu.