Maintaining; Cleaning And Maintenance; Troubleshooting - Insignia NS-LCD26A Guide De L'utilisateur

Insignia NS-LCD26A LCD TV

Maintaining

About temperature
• Do not use the television in hot and cold
rooms (locations).
• When the television is used in rooms
(locations) with low temperature, the picture
may leave trails or appear slightly delayed.
This is not a malfunction and the television
will recover when the temperature returns to
normal.
• Do not leave the television in a hot or cold
location. Also, do not leave the television in a
location exposed to direct sunlight or near a
heater, as this may cause the cabinet to
deform and the screen to malfunction.
• Storage temperature: 32 to 122°F (0 to 50°C)
• Working temperature: 41 to 104°F (5 to 40°C)
About After-Image
The extended use of a fixed image program can
cause a permanent after-image (also known as
burn-in) on the screen. This background image
is viewable on normal programs in the form of a
stationary fixed image. This irreversible screen
damage can be limited by doing the following:
• Reduce the brightness/contrast setting to a
minimum viewing level.
• Do not display the fixed image for extended
periods of time.
• Turn the power to the television off when not
in actual use.
Caution
• Do not allow a still picture to be displayed for an
extended period, as this can cause a
permanent after-image to remain on the
screen.
Examples of still pictures include logos, video
games, computer images, teletext, and images
displayed in 4:3 mode.
• The permanent after-image on the screen
resulting from fixed image use is not an
operating defect and as such is not covered by
the warranty.
• This television is not designed to display fixed
images for extended periods of time.

Cleaning and Maintenance

To clean this television, wipe with a soft, dry
cloth. If the surfaces are extremely dirty, use a
soft cloth dipped in a soap and water solution or
a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt
from the screen.
• Never use alcohol, paint thinner, or benzine
to clean this television.
• Before using a chemically treated cloth, read
the instructions that came with the cloth
carefully.

Troubleshooting

If, after reading these operating instructions, you
have additional questions related to the use of
your television, call the service center.
Before calling service, check the symptoms and
follow the suggested solutions.
Category Problem
Remote
control
Video and
Audio
www.insignia-products.com
Possible Solution
Remote control • The batteries may be weak.
does not Replace the batteries.
operate • Check the orientation of the
batteries.
• Make sure the power cord is
plugged in.
Remote control • If you replaced the batteries
does not to the remote recently, the
operate other code numbers for the video
brand equipment may need to be
equipment reset.
• There may be more than one
code for the equipment that
you are attempting to
operate.
• There is a possibility that this
equipment can only be
operated by its original
remote control.
No picture • Make sure that the power
(screen is not cord is plugged in.
lit) • Press POWER on the
television or on the remote
No sound
control.
• Try another channel. It could
be station trouble.
Dark, poor, or • Select a different picture
no picture mode.
(screen is lit) • Adjust the brightness in the
video setting.
Good sound
• Check the antenna/cable
connections.
No color/dark • Adjust the color saturation in
picture/color Is the video setting.
not correct
Only snow and • Check the antenna/cable
noise appear on connections.
the screen • Try another channel. It could
be station trouble.
Dotted lines or • Adjust the antenna.
stripes • Move the television away
from noise sources such as
cars, neon signs, or hair
dryers.
Double images • Use a highly directional
outdoor antenna or a cable
television provider.
Black box on • You have selected a text
screen option and no text is
available. Turn off the Close
Caption feature or select a
different option.
Good picture, • The sound may be muted.
no sound Press MUTE again to cancel.
• Make sure that the stereo
mode is set to stereo or
mono.
Audio noise • Communication problems
may occur if infrared
communication equipment
(such as infrared cordless
headphones) is used near
the television. Move the
infrared communication
equipment away from the
television until the noise is
eliminated.
21