Insignia NS-LCD26A Guide De L'utilisateur page 9

Insignia NS-LCD26A LCD TV
Before connecting devices
• Carefully check the terminals for position and
type before making any connections.
• The illustration of the external equipment
may be different depending on your model.
• Loose connectors can result in image or color
problems. Make sure that all connectors are
securely inserted into their terminals.
• Refer to the user manual of the external
device as well.
• When connecting an external device, turn the
power off on the panel to avoid any issues.
Connecting headphones
Headphones
To connect headphones:
• Insert the headphone plug into the
television's headphone jack.
Warning
To avoid hearing damage when using
headphones, adjust the headphone volume to
avoid excessive levels.
Note
The illustration may be different depending on
model.
Locating the television
Install the television in a room where direct light
will not fall upon the screen. Total darkness or a
reflection on the picture screen may cause
eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
TV left side
www.insignia-products.com
Connecting the antenna
Optimum reception of color requires a good
signal and generally means that an outdoor
antenna must be used. The exact type and
position of the antenna depends upon your
particular area.
Antenna input
TV right side
Note
• We recommend that the 75-ohm coaxial cable
be used to eliminate interference and noise
which may occur due to radio wave conditions.
• Do not bundle the antenna cable with the
power cord.
• If you cannot install the antenna correctly,
contact your dealer for assistance.
Connecting digital optical audio
Audio Processor
RF Coaxial Cable
(75 ohm)
Wall antenna
socket
Optical cable
S/PDIF IN
(Optical)
OR
Hi-fi System
7