Adjusting The Picture; Using The Clock - Insignia NS-F24TV Guide De L'utilisateur

Information about USA channel numbering
• The ATSC PSIP channel uses a two part
channel number which includes:
• a major channel number
• a minor channel number
Note
Example: Channel 5-1. The "5" is the major
channel number and the "1" is the minor channel
number.
• In the US, in most locations the major
channel number is the same for both analog
and digital channels (It is equal to the NTSC
channel number for existing broadcasters.)
• In the US, a minor channel number of zero is
used for a broadcaster's analog channel.
Channel Numbering Example
• Original NTSC channels for Des Moines, IA:
5, 8, 11, 13, and 17.
• Possible NTSC + ATSC channels for Des
Moines, IA: 5-0, 8-0, 11-0, 13-0, and 17-0
(channel numbers for existing analog
channels) and 5-1, 5-2, 8-1, 8-2, 8-3, 8-4,
and 13-1 (channel numbers for digital
channels).
Controlling the sound
Using the VOL+ and VOL- buttons
Press:
• VOL+ to increase the volume.
• VOL- to decrease the volume.
Using the MUTE button
To mute the sound:
• Press MUTE on the remote.
To resume the sound:
• Press MUTE on the remote.
-OR-
Press VOL+.
Note
If you mute the sound, the color of VOLUME
displayed on the screen turns red. After resuming
the sound, the color of VOLUME displayed on the
screen turns green.

Adjusting the picture

To adjust the picture:
1 With the television turned on, press MENU to
display the main menu.
2 Press or
10
to select PICTURE.
www.insignia-products.com
Insignia NS-F24TV 24" Flat Panel Television
3 Press or
4 Press or
5 Press or
Setting Press
Contrast weaker
Brightness darker
Color paler
Tint purplish
Sharpness softer
Selecting a picture mode
There are three preset picture modes (Standard,
Dynamic, and Soft) and one user-set picture
mode (Personal).
To select a picture mode:
1 Press PICTURE on the remote control.
2 Select from one of the following:
• STANDARD—Select for a normal picture.
• DYNAMIC—Select for a bright and
dynamic picture.
• SOFT—Select for a finely detailed picture.
• PERSONAL—Select to create your own
picture mode.
Changing picture size
You can change the picture size (aspect ratio)
according to your video signal type or personal
preference. This can only be done in DTV mode
when the video signal type is in 16:9 format.
To change the picture size:
Press ZOOM to select the desired picture size
(aspect ratio). You can select between NORMAL
and ZOOM.

Using the clock

To enter the clock menu:
1 With the television turned on, press MENU to
display the main menu.
2 Press or
to enter the Picture menu.
to select a setting to adjust.
to adjust the setting.
Press
stronger
lighter
deeper
greenish
sharper
to select CLOCK.