Print Mode; Manual Printout - Chauvin Arnoux C.A 43 FILEDMETER Mode D'emploi

MANUAL PRINTOUT

On measurement function or memorisation function, each press on
to the TxD optical output a series of data in the following form:
Each group is separated by 1 space.
The output of the five groups is ended by a carriage return and 2 line paper advance.
Contents of each group :
< Time >
< Filter >
< Function >
< Measurement >
< Unit >
Example of printout :
___ 10:30 SMOOTH
___ 09:30
15:05
Dt
During the duration of the transmission, the COM and PRINT symbols are lit on the display.
- the PRINT symbol indicates a demand for transmission.
- the COM symbol indicates the effective output of the data.
On the read memory function, press
digital output, starting from the last memorisation and decreasing the addresses to the
first memorisation according to the date.
The data is presented in the same form (see previous paragraph). The
that it is a printout of the measurement memory. The time corresponds to the date of each
event described. When the memory is empty, the instrument transmits a line of three hyphens.
To interrupt the current printout of the measurement memory, simply press
second time.

PRINT MODE

<Time> <Filter> <Function> <Measurement> <Unit>
Contains the time or the duration of Dt displayed on the instrument
when the command is sent, in the form HH:MM.
Contains the SMOOTH or PEAK function which is in service when the
command is sent.
Contains the MEAS function information (current measurement), AVG,
MIN, MAX, HOLD.
Contains the digital measurement, 4 digits plus decimal point.
Contains the measurement symbol displayed.
HOLD
PEAK MIN
___ AVG
12.3 V/m
2
1999 µW/cm
12.57 A/m
to send the contents of the memory to the
PRINT
65
transmits
PRINT
MR symbol specifies
PRINT
a