Switch The Phone On And Off - Nokia 6085 Mode D'emploi

Insert a microSD card
To insert a memory card, use a fingernail
as a lever, place it in the recessed area of the
memory card holder, and swing the holder
open (1). Place the memory card in the card
holder (2). Make sure that the memory card
is properly inserted and that the gold-colored
contacts on the card are facing upwards.
Close the memory card holder (3).
You can use the memory card to save your
multimedia files, such as video clips, sound
files, and images, in the Gallery.
Remove the microSD card
Important: Do not remove the memory card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
To remove the memory card, use a fingernail as a lever, place it in the recessed
area of the memory card holder, and swing the holder open. Push gently with
a fingernail against the card to loosen it from the holder. Pull the card out.
Close the memory card holder.
Format the memory card
To format the memory card, see "Format memory card," p. 58.

■ Switch the phone on and off

Press and hold the end key until the phone
switches on or off. If the phone asks for
a PIN, enter the code and select OK.
Plug and play service
When you turn on your phone for the
first time and the phone is in the standby
mode, you are prompted to get the configuration settings from your service provider
(network service). Confirm or decline the query. See Connect to service provider
support in "Configuration," p. 54 and "Configuration settings service," p. 10.
G e t s t a r t e d
13