Ptt Settings - Nokia 6085 Mode D'emploi

P u s h t o t a l k
1. To view the contact who sent the invitation and the channel address
if the group is not a private channel, select View.
2. To add the channel to your phone, select Save.
3. To set the status for the channel, select Active or Inactive.
4. To decline the invitation, select View > Discard > Yes.

■ PTT settings

There are two kinds of PTT settings: settings for connecting to the service
and settings for use.
You may receive the settings for connecting to the service from your network
operator or service provider. See "Configuration settings service," p. 10.
You can enter the settings manually. See "Configuration," p. 54.
To select the settings for connecting to the service, select Menu > Push to talk >
Config. settings and one of the following options:
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account in the active configuration settings.
You can also select from other available options.
To edit the PTT settings for use, select Menu > Push to talk > PTT settings
and one of the following options:
1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls.
To make but not receive one-to-one calls, select Off. The service provider may
offer some services that override these settings. To set the phone to first notify
you of incoming one-to-one calls with a ringing tone, select Notify.
PTT key default function > Open contact list, Open channel list, Call contact/
group, or Call PTT channel
Show my login status > Yes — to enable the sending of the login status
PTT status in startup > Yes or Ask first — to set the phone to automatically
connect to the PTT service when you switch on the phone
Push to talk when roaming — to switch the PTT service on or off when the phone
is used outside of the home network
Send my PTT address > No — to hide your PTT address from calls
69