Security; Restore Factory Settings - Nokia 6085 Mode D'emploi

S e t t i n g s

■ Security

When security features that restrict calls are in use (such as, call restricting,
closed user group, and fixed dialing) calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security and one of the following options:
PIN code request — to set the phone to ask for your PIN or UPIN code every time
the phone is switched on. Some SIM cards do not allow the code request to be
turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your
phone (network service). A password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers, if this
function is supported by your SIM card.
Closed user group — to specify a group of people whom you can call and who can
call you (network service).
Security level > Phone — the phone asks for the security code whenever a new
SIM card is inserted into the phone. Select Memory and the phone asks for the
security code when the SIM card's memory is selected and you want to change
the memory in use.
Access codes — to set the PIN code or UPIN code in use or to change the security
code, PIN code, UPIN code, PIN2 code, and call restrictions password.
Code in use — to select whether the PIN code or UPIN code should be active.
Authority certificates or User certificates — to view the list of the authority or
user certificates downloaded into your phone. See "Certificates," p. 80.
Security module settings — to view Security module details, activate Module PIN
request, or change the module PIN and signing PIN. See also "Access codes," p. 9.

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu >
Settings > Restore settings and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers
in Contacts are not affected.
55