Data Transfer With A Compatible Device; Synchronize From A Server; Usb Data Cable - Nokia 6085 Mode D'emploi

S e t t i n g s

Data transfer with a compatible device

For synchronization, Bluetooth wireless technology is used. The other device
is in the standby mode.
To start a data transfer, select Menu > Settings > Connectivity > Data transfer
and the transfer partner from the list other than Server sync and PC sync. Based
on the settings, the selected data is copied or synchronized. The other device also
must be activated to receive data.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts from a compatible PC,
use Bluetooth wireless technology or a USB data cable (CA-53). You also need
the correct version of Nokia PC Suite software for your phone installed on the PC.
See "Computer connectivity," p. 83 for information about Nokia PC Suite.
Synchronize the data in the phone contacts, calendar, and notes to correspond
with the data of your compatible PC by starting the synchronization from the PC.

Synchronize from a server

To use a remote Internet server, you have to subscribe to a synchronization
service. For more information and the settings required for this service, contact
your service provider. You may receive the settings as a configuration message.
See "Configuration settings service," p. 10 and "Configuration," p. 54.
If you have saved data on the remote Internet server, you can synchronize your
phone by starting the synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server sync.
Depending on the settings, select Initializing sync or Initializing copy.
If the contacts or calendar are full, synchronizing may take up to 30 minutes to
complete, when synchronizing for the first time or after an interrupted synchronization.

USB data cable

You can use the USB data cable to transfer data between the memory card
inserted in the phone and a compatible PC or a printer supporting PictBridge.
You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the
data cable; when the phone displays USB data cable connected. Select mode.,
select OK and one of the following options:
Nokia mode — to use the cable for Nokia PC Suite
51