Charge The Battery; Enter First Settings; Cd-Rom - Nokia E62 Guide D'utilisation

G e t s t a r t e d
The picture shows the location of the power key.

Charge the battery

1. Connect the charger to a wall outlet.
2. Connect the charger to the bottom of the device. If you have a battery charger adapter, connect the charger to the adapter,
and the adapter to the bottom of the device.
3. Connect the power cord to the battery charger adapter. The battery indicator bar starts scrolling on the display. If the battery
is completely discharged, it may take a few minutes before the charging indicator is shown. The device can be used while
charging.
4. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the device, then from the outlet.
When the battery charge level is too low for operation, the device switches itself off.

Enter first settings

When you power on the device for the first time, or when you switch on the device after the battery has been removed for a
longer period, your device asks for a city, time, and date. You can change these settings later in Clock.
1. Select the city in which you are located from the list and OK. To browse for a city, start to type the name of the city, or scroll
to a city. It is important to select the correct city, because scheduled calendar entries that you create can change if the new
city is located on a different time zone.
2. Set the time, and select OK.
3. Set the date, and select OK.

CD-ROM

The sales package CD-ROM is compatible with Windows 98SE, Windows ME, Windows 2000, and Windows XP.
You can install Nokia PC Suite from the CD-ROM. Nokia PC Suite can be used only with Windows 2000 and Windows XP.
Copyright © 2006 Nokia. All Rights Reserved. 10