Charge The Battery; Connect A Headset - Nokia 6350 Guide D'utilisation

■

Charge the battery

Your battery has been charged at the
factory. When the device indicates a
low charge, do the following:
1. Connect the charger to a wall
outlet.
2. Open the USB connector door.
Connect the charger to the micro
USB connector on your phone.
3. When the device indicates the
battery is fully charged, disconnect the charger from the device, then from the
wall outlet.
You may also charge the battery using a USB data cable with power from a
computer.
1. Connect a USB data cable with a micro USB connector to the USB port of a
computer and to your device.
2. When the battery is fully charged, disconnect the USB cable.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made. The
charging time depends on the charger used.
The phone must only be connected to products that bear the USB-IF logo or have
completed the USB-IF compliance program.
■

Connect a headset

You can connect a universal 2.5 mm
headset to your device. Open the
headset door, and then connect the
headset to the device.
14