Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
S e t t i n g s
VPN access point settings
Contact your service provider for the correct access point settings.
To edit VPN access point settings, select the access point and Options.
Select from the following settings:
Connection name
— Enter a name for the VPN connection. The maximum length of the name is 30 characters.
•
VPN policy
— Select a VPN policy to be used with this access point.
•
Internet access pt.
— Select the Internet access point to be used with this VPN access point.
•
Proxy serv. address
— Enter the proxy server address of this VPN access point.
•
Proxy port number
— Enter the number of the proxy port.
•
Configurations
To view and delete configurations for trusted servers, select
You can receive messages from your network operator, service provider, or company information management that contain
configuration settings for trusted servers. These settings are automatically saved in Configs.. You may receive configuration
settings for access points, multimedia or e-mail services, and IM or synchronization settings from trusted servers.
To delete configurations for a trusted server, select the server, and press the backspace key. The configuration settings for other
applications provided by this server are also deleted.
Date and time settings
See "Clock," p. 25.
Security settings
See "Define security settings," p. 84.
Enhancement settings
Select
Menu
Tools
Settings
>
>
Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset
where it can endanger your safety.
With most enhancements, you can select from the following settings:
Default profile
— Select the profile that is activated when you attach an enhancement to your device.
•
Automatic answer
— Let the device answer phone calls automatically when an enhancement is attached. Select
•
the device answer an incoming call automatically after 5 seconds. If the ringing type is set to
menu, automatic answer is disabled.
Text phone settings
If you use a text phone (TTY), you must connect it to your device before you can change the settings and use the text phone.
Select from the following settings:
Default profile
— Select the profile that is activated when you attach a text phone (TTY, teletypewriter) to your device.
•
Use text phone
— Select
•
Copyright © 2006 Nokia. All Rights Reserved.
> Enhancement.
Yes
if you want to start using the text phone.
Menu
Tools
Settings
>
>
>
83
Connection
> Configs..
Beep once
or
Silent
On
to have
in the Profiles
Publicité
Chapitres
Table des Matières
