Switch The Device On And Off; Antenna - Nokia 6300b Guide D'utilisation

Battery talk and standby times are estimates only and depend on signal
strength, network conditions, features used, battery age and condition,
temperatures to which battery is exposed, use in digital mode, and many other
factors. The amount of time a device is used for calls will affect its standby time.
Likewise, the amount of time that the device is turned on and in the standby
mode will affect its talk time.

Switch the device on and off

To switch the device on or off, press and hold the power key.
If the device prompts for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
The device may prompt you to set the time and date. Enter the local time, select
the time zone of your location in terms of the time difference with respect to
Greenwich mean time (GMT), and enter the date. See "Time and
date," p. 47.
When you switch on your device for the first time and the device is in the
standby mode, you may be prompted to get the configuration settings from
your service provider (network service). For more information refer to
to support. See "Configuration," p. 55. See "Configuration setting
service," p. 12.

Antenna

Your device has an internal antenna.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. To optimize antenna
performance and battery life, avoid contact with
the antenna area when operating the device.
G e t s t a r t e d
Connect
17