Publicité
Les langues disponibles
Les langues disponibles
VOLUME FUNCTIONS
CONTROL
Increase the
volume
Decrease the
volume
TIP: You can also increase or decrease the volume using the volume controls on your
device or in the Bose app.
Auto Volume
The earbuds can automatically adjust audio volume depending on the level of
noise around you. This helps your audio stay at a consistent volume relative to
your surroundings.
When Auto Volume is enabled and the noise level increases above your baseline
volume setting, audio volume increases proportionally after a few seconds. When the
noise level decreases, audio volume returns to your baseline setting.
NOTES:
• It may take several seconds for audio volume to increase in response to noise.
• When you make or receive a phone call, Auto Volume is temporarily disabled. When
you end the call, Auto Volume returns to its previous setting.
Enable Auto Volume
Auto Volume is disabled by default. To enable Auto Volume, use the Bose app. You can
access this option from the Settings menu.
Manually adjust volume when Auto Volume is enabled
To manually adjust volume, use the earbud controls (see "Volume functions") or the
volume controls on your device until you hear the volume change.
NOTE: If the earbuds are actively increasing audio volume due to noise, manually
adjusting volume may have a minimal or only temporary effect unless you
increase the baseline setting above the current level. To decrease volume in
this situation, disable Auto Volume using the Bose app.
EARB U D C O NT RO LS
WHAT TO DO
Double-press and hold
the right earbud button.
The volume increases
as you hold the button.
Release when you reach
the desired volume.
Double-press and hold
the left earbud button.
The volume decreases
as you hold the button.
Release when you reach
the desired volume.
|
1 8
E N G
Publicité
