Processor; User Interface; Inputs And Outputs; Power Supply Specifications (Absorption) - dB Technologies VIO L1610 Manuel D'utilisation

PROCESSOR

Internal controller:
Advanced functions:
Limiter:

USER INTERFACE

Controls:
Indicator LEDs:
Status LEDs (RDNet network)
Handles

INPUTS AND OUTPUTS

Power supply inputs and re-links:
Audio inputs:
Audio outputs:
RDNet inputs/outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (ABSORPTION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Max number of modules per
power supply line (**)
[mains input + mains link]:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO-L1610
60
32-bit DSP
FIR filters
Peak, RMS, Thermal
2 rotary controls with 8 positions (Coupling, Compensation)
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
integrated
PowerCON® In/Link
1x XLR IN balanced (insulation: Floating ADC)
1x XLR link OUT balanced
Data In / Data Out (etherCON® connectors)
1x USB type B
1.4 A (220-240V~) - 2.1 A (100-120V~)
3 A (220-240V~) - 4.5 A (100-120V~)
1 + 4 (220-240V~) / 1 + 3 (100-120V~)
34 W
3 A
Code 420120324 REV. 1.0
English