Mechanics; Front Side; Rear Side - dB Technologies VIO L1610 Manuel D'utilisation

English

MECHANICS

2
1
5 6 4 3
The module ergonomics and the quick assembly in line arrays are guaranteed by:

FRONT SIDE

1) Lower anchoring system with pins for connecting other modules or the DRK-210 flybar (in stacked
configuration).
2) Retractable brackets with pins for fastening to an upper module (or to the DRK-210 flybar in flown
configuration).

REAR SIDE

3) Central bracket. Equipped with graduated label and pins for selecting the angle of the line array module.
Steps every 1° are possible (range: 0-10°).
4) Movable arm with slot. Inserted in bracket [3], it mechanically fastens the unit at the selected angle by
means of pins.
RH AND LH SIDES
5) Handle in a balanced position with respect to the weight of the cabinet.
6) Handle in the back position in the cabinet, facilitating the lifting of a module on the back, when the front
side is fixed.
The VIO-L1610 modules are also equipped with 2
rain covers on the rear side, in order to protect the
amplifier from water and allow operation even in
critical weather conditions. They will be no longer
shown in the following drawings, for simplicity.
For further information regarding the fly-bar (see the
ACCESSORIES section), please refer to the relevant
manual.
VIO-L1610
Code 420120324 REV. 1.0
36