Viking MI 422 Manuel D'utilisation page 117

9. Link iMow and dock
1. Disab. device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
( 5.2)
● To deactivate the disabling device,
press the illustrated button
combination.
2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
– None:
The robotic mower is unprotected.
– Low:
Anti-theft alarm is active; PIN code
must be entered for linking the robotic
mower and docking station as well as
for resetting the machine to the default
settings.
– Medium:
Same as for "Low", however, the time
lock is also active.
– High:
Same as for "Medium", however,
settings can also only be changed
following entry of the PIN code.
VIKING recommends that the
"Low", "Medium" or "High" safety
levels be set.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
0478 131 9934 A - EN
Anti-th. alarm:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting prot.:
PIN code query when settings are
changed.
3. Change PIN code:
The 4-digit PIN code can be
changed if required.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".
● First enter the old PIN code and confirm
with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
VIKING recommends making a
note of the changed PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit master
code is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your VIKING
specialist dealer with the 9-digit
serial number and the 4-digit date,
which are displayed in the selection
window.
4. Start signal:
For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.
5. Alarm signal:
For switching on and off the acoustic
signal that sounds when the robotic
mower hits an obstacle.
6. Menu signal:
For switching on and off the acoustic
click that sounds when a menu is
opened and a selection is confirmed with
OK.
7. Child lock:
For switching on and off the device that
prevents the mowing blade from running
when the machine is being played with.
Function:
If the impact sensor is triggered several
times in succession within a short time (for
example when a child is playing with the
robotic mower), the mowing blade is
switched off and the robotic mower stops
with an appropriate message.
If the impact sensor is not triggered again,
the robotic mower continues automatic
mowing after a few seconds.
8. Keylock:
When the keylock is switched on,
the buttons on the display can
only be operated if the Back
button is pressed and held and the
control pad is then pressed forwards.
The keylock is activated 2 minutes after
the last button has been pressed.
9. Link iMow and dock:
Following initial operation, the
robotic mower can only be operated
in conjunction with the installed docking
station.
Following a replacement of the docking
station or of electronic components in the
115