sawdust or chips
•
•
liquid fuel
coal or other fossil fuels
•
plastic and derivatives
•
treated paper and cardboard
•
waste
•
fuels that release toxic or polluting substances
•
Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the stove to deteriorate
more rapidly and debris to accumulate in the stove and in the smoke evacuation system, thereby reducing performance and safety.
The gases produced by these fuels are dangerous for the environment and for your health!
Using fuel that is not compliant with the above will void the warranty.
! IMPORTANT
The stove needs to be connected to a single chimney that guarantees the draught declared by the Manufacturer
and observes the installation regulations that apply to the installation site.
The room where the stove is installed must have an air intake.
The Manufacturer will not be held liable for installation that is not compliant with the laws in force, incorrect air circulation in the rooms
and inappropriate use of the appliance.
In particular, it is necessary:
that the appliance be connected to a smoke evacuation system duly sized to guarantee the draught declared by the Manufacturer,
•
Use and maintenance manual RBC 8010 - RBC 8012
The stove installation site must be chosen so that the generated heat can spread evenly
throughout the rooms that you wish to heat.
Rev.0 17.07.19
Page 49
EN