Sony HT-Z9F Manuel D'instructions page 47

To disconnect the headphones
Perform any of the following items.
– Disable the BLUETOOTH function on
the headphones.
– Set [Bluetooth Mode] to [Receiver] or
[Off] (page 65).
– Turn off the system or headphones.
– Select the device name of the
connected headphones from
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Device List].
[Connected] of the device name
disappears.
About the Connection of the
Headphones
• You may not be able to adjust the
volume level depending on the
BLUETOOTH compatible headphones.
• Input of BLUETOOTH is disabled when
[Bluetooth Mode] is set to [Off] or
[Transmitter].
• You can register up to 9 BLUETOOTH
devices. If a 10th BLUETOOTH device is
registered, the oldest connected
BLUETOOTH device will be overwritten
by the new one.
• The system can display up to 15
detected BLUETOOTH devices in the
[Device List].
• You cannot change the sound effect
or settings while transmitting sound to
the BLUETOOTH compatible
headphones.
• Some content may not be output due
to content protection.
• Playback of audio/music on the
BLUETOOTH device is delayed
compared to that on the main unit due
to the characteristics of BLUETOOTH
wireless technology.
• You can enable or disable the
reception of LDAC audio from the
BLUETOOTH device (page 65).
47
US