Connecting A Tv With An Analog Audio Cable - Sony HT-Z9F Manuel D'instructions

About operations with the
remote control that is supplied
with the system
You can use the following buttons.
You can adjust the volume of the
subwoofer and rear speakers, and
adjust sound quality in addition to
turning the system on/off and adjusting
volume that can be operated by the TV
remote control.
Notes
• If you select the input other than TV on
the remote control supplied with the
system, the TV sound is not output from
the system. To output the TV sound, press
TV on the remote control to change to the
TV input.
• During the connecting the TV with the
BLUETOOTH function, the following
remote control buttons do not work.
///,
(enter), OPTIONS, HOME,
DISPLAY,  (play/pause), /
(previous/next)

Sound mode
selecting buttons
VOICE
VERTICAL S.
NIGHT
 +/–
SW  +/–

REAR  +/–
Connecting a TV with an
Analog Audio Cable
To connect the following devices to the
system, connect them via the ANALOG
IN jack on the system.
– TVs that do not have an HDMI jack and
optical digital output jack
– Portable audio devices such as
smartphones and WALKMAN®
For listening to the connected device,
see "Listening to the Device Connected
with an Analog Audio Cable" (page 40).
TV
Analog audio cable
(not supplied)
Analog
audio out
Smartphone,
WALKMAN®, other
audio devices, etc.
21
US