Controls And Indicating Elements - Schmidt SS 30.300 Notice D'utilisation

Controls and indicating elements

1
1
4 x LED green
2
3 x LED yellow
4-digit
3
alphanumeric
display
"Set"
4
pushbutton
"Mode/Enter"
5
pushbutton
Mode/Enter
Lighting LED = set display unit:
3
- LED 1 (Nm /min) / LED 2 (Nm
indication (standard volume flow).
3
- LED 3 (Nm ): quantity meter (current consumed
quantity)
LED 3 flashing: Stored meter reading
(= meter reading before the last reset).
- LED 4 (°C): Medium temperature in °C.
Display functions
3
- 10 : The displayed value must be multiplied with
the factor 1000.
- SP1 / SP2: Indication of the switching status, LED
lights if the corresponding output is switched.
- Indication of the current standard volume flow.
- Indication of the meter reading.
- Indication of the current medium temperature.
- Indication of the parameters and parameter values.
- Setting of the parameter values
(scrolling by holding pressed; incremental by
pressing briefly).
- Change of the display unit in the Run mode.
Selection of the parameters and acknowledgement
of the parameter values.
Set
3
/h): flow rate
2
3
4
5
25