Electrical Connection - Schmidt SS 30.300 Notice D'utilisation

Electrical connection

The unit must be connected by a suitably qualified electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply according to EN50178, SELV, PELV.
The device shall be supplied from an isolating source and
protected by an overcurrent device such that the limited voltage
circuit requirements in accordance with UL 508 are met.
Disconnect power before connecting the unit as follows.
2 x pnp
1
2
4
2: OUT2
3
4: OUT1
OUT1: switching signal or pulse sequence pnp
OUT2: switching signal pnp or analogue signal (I)
Core colours of SCHMIDT cable Mat.No. 300722:
1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black).
BN
L +
WH
BK
BU
L
1 x pnp / 1 x analogue
1
BN
2
WH
4
BK
2: OUT2
3
BU
4: OUT1
L +
L
29