First Use; Cleaning And Maintenance; Power Outage - V-ZUG Prima 60i Mode D'emploi

FIRST USE

Connect the appliance to the power supply.
The ideal food storage temperatures have been preset in the factory (3-4/MED).
Note: After starting up the appliance for the first time, it will take 2 to 3 hours before the storage
temperature is reached and products can be stored normally.

CLEANING AND MAINTENANCE

Clean the appliance periodically. Clean the inside of the refrigerator with
a cloth, lukewarm water and a suitable, neutral cleaning agent. Never use
other cleaning agents or abrasives. To ensure that defrost water can drain
away correctly, clean the defrost water drainage hole on the back wall near
the vegetable and fruit compartment regularly using the supplied tool (see
picture).
Before any cleaning or repair work, disconnect the power supply by
unplugging the appliance or switching it off.
TAKING THE APPLIANCE OUT OF USE
FOR A LONG TIME
Disconnect the appliance from the power supply, empty it, leave it to defrost and clean it. Leave
the doors of the appliance slightly open so that air can circulate inside the compartments. This
will prevent the formation of mould and bad odours.

POWER OUTAGE

Keep the door of the appliance closed. This will keep the food storage temperature low for
longer. Do not refreeze partially defrosted food, but consume it within 24 hours.
USING YOUR FRIDGE/FREEZER
Setting the temperature:
• For information on how to set the temperature, see the enclosed product data sheet.
Note: The ambient temperature, the frequency with which the door is opened, hot food and an
unsuitable appliance position can influence the temperature inside the appliance, which can
differ from the temperature shown on the display.
16