System Exclusive Message - Roland Fantom X6 Mode D'emploi

■System Realtime Messages
●Timing Clock
Status
F8H
* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI.
●Start
Status
FAH
* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI or
REMOTE.
●Continue
Status
FBH
* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI or
REMOTE.
●Stop
Status
FCH
* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI or
REMOTE.

■System Exclusive Message

●MIDI Machine Control (MMC)
* Received when the MMC Mode parameter (System/Sync/Tempo) is SLAVE.
❍STOP (MCS)
Status Data byte
F0H 7FH, dev, 06H, 01H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC command message
01H STOP (MCS)
F7H EOX (End of Exclusive)
❍DEFERRED PLAY (MCS)
Status Data byte
F0H 7FH, dev, 06H, 03H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC command message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive)
❍LOCATE (MCP)
❍Format2---LOCATE [TARGET]
Status Data byte
F0H 7FH, dev, 06H, 44H, 06H, 01H,
hrH, mnH, scH, frH, ffH
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC command message
44H LOCATE (MCP)
06H Byte count
01H "TARGET" sub-Command
hrH Standard Time Specification with subframes (typeff)
mnH
scH
frH
ffH
F7H EOX (End of Exclusive)
Implémentation MIDI
Status
F7H
Status
F7H
Status
F7H
309