Pneumatic Installation - Burkert 2012 Instructions De Service

Pneumatic installation

Control medium: air
a) Cirect connection to the piston control valve
- With control function A, at the lower connection of the actuator with G 1/4" thread
- With control function B, at the upper connection of the actuator with G 1/4" thread
- With control function I, at the upper and lower connections of the actuator with G 1/4" thread
b) Connection via pilot valves
Mount the solenoid valves Type 6012 P or 6014 P with the banjo bolt on the respective control port
(see (a)) of the actuator.
Connect the control air to port P
2012 - 7