Connecting Up; Understanding The Rear Panel; Connecting The Speakers - Pioneer XR-A9700DV Mode D'emploi

Understanding the Rear Panel

Connect an external AV amp
or digital recorder here
Plug in an external
audio source here
Connect the
AM and FM
antennas here
Connect to the
analog inputs
of an external
recorder here

Connecting the Speakers

Select the TV picture
format in your region
Connect your TV and
VCR to these outputs
TV
L
SYSTEM
PAL
AUTO NTSC
R
AUX IN
ANTENNA
AM FM OPTICAL
LOOP UNBAL DIGITAL
75Ω OUT
ANTENNA
REC OUT
R L
+
L
Connect the
-
-
main front
R
+
speakers here
Important: Before making or changing any rear panel connections, make sure
that all the components are switched off and unplugged from the power supply.
To get the best sound from the system, it's important that you connect the two strands
of speaker wire for each speaker to the correct speaker terminal. To help you match up
the wires and terminals correctly, the supplied speaker cord is color coded: connect the
black half of the cord to the black (–) terminals, and the red half to the red (+)
terminals.
Front speaker terminals
Note: Make sure that the bare speaker wires cannot touch each other, or come
into contact with other metal parts once the unit is switched on.
Twist the exposed wire
strands together.

2 Connecting Up

VIDEO S-VIDEO
OUT OUT
AC INLET
Connect to a
power outlet
Pull open the tab and
insert the twisted wire fully
into the terminal.
Snap the tab shut again to
secure the speaker cord.
9
En